Our Services

Concrete Repair and Prep

Crack repair, patching and surface preparation before coating. Proper prep is the key to a long-lasting epoxy floor.

Concrete repair and preparation is the most critical step for a lasting epoxy floor. Services include crack filling, spall repair, moisture testing, and diamond grinding. Repair costs $1-$4 per square foot and ensures the epoxy bonds properly for maximum longevity.

Surface preparation is the single most important factor in epoxy floor longevity — more important than the coating product itself. Even the most expensive epoxy system will fail if applied to poorly prepared concrete. Our preparation process includes moisture vapor testing (critical in the humid Shoals climate), diamond grinding or shot blasting to open the concrete pores, crack chasing and filling with epoxy paste, spall and pitting repair with polymer-modified concrete, and a final cleaning to remove all dust and contaminants. This process typically takes a full day for a standard two-car garage and ensures the epoxy bonds mechanically and chemically to the concrete substrate. We never skip prep steps, even when the concrete looks acceptable on the surface.

Surface Prep Matters

Long-lasting epoxy starts before the coating is mixed. Concrete must be evaluated for moisture, oil contamination, cracks, spalling, prior sealers, and surface profile. In the Shoals climate, humidity and slab moisture are common causes of peeling DIY coatings, so professional preparation is the part of the project that protects the investment.

System Selection

The right coating depends on how the space is used. Garages need hot-tire resistance and chemical cleanup. Workshops need abrasion resistance. Commercial spaces may need slip texture, safety markings, fast cure timing, and heavier mil thickness. A good estimate should match the system to the slab and the use case.

Local Conditions

Florence, Muscle Shoals, Sheffield, Tuscumbia, Killen, and Russellville properties deal with clay dust, wet vehicles, hot summers, and concrete movement over time. Epoxy helps by sealing the surface, making cleanup easier, and turning stained concrete into a brighter, more usable part of the home or business.

What to Ask Before Choosing an Epoxy System

For any Concrete Repair and Prep project, ask how the slab will be prepared, whether moisture testing is included, what coating layers are being used, what texture or slip resistance is recommended, how long the space must stay off-limits, and what maintenance is required after cure. The cheapest quote is not always the best value if it skips grinding, crack repair, primer, or the correct topcoat for Alabama heat and humidity.

Frequently Asked Questions

Why is concrete prep so important?

Proper preparation is the #1 factor in epoxy longevity. Without proper grinding, cleaning, and repair, epoxy can peel, bubble, or delaminate within months.

Can you epoxy over cracked concrete?

Yes, but cracks must be repaired first. We fill cracks with specialized epoxy crack filler, repair spalls, and grind the surface smooth before coating.

Do you test for moisture?

Yes, we always perform moisture testing before applying epoxy. Excessive moisture can cause adhesion failure, so we test and address any moisture issues first.